Innotek Basic In-Ground Fence Troubleshooting Guide

Innotek Basic In-Ground Fences are a fantastic way to keep your pet safe within your yard, but like any technology, they can sometimes come across issues. Here is a comprehensive troubleshooting guide to help you address common problems that may arise.

1. Check the Boundary Wire

One of the most common issues with in-ground fences is a break in the boundary wire. Make sure to inspect the wire for any exposed areas or breaks. If you find any, repair or replace the wire accordingly.

2. Test the Transmitter

Ensure that the transmitter is plugged in and powered on. Test it with the collar to see if it’s emitting signals properly. If not, you may need to recalibrate the transmitter.

3. Adjust the Collar

Make sure the collar is fitted correctly on your pet and that it is not too tight or too loose. Incorrect fitting can lead to malfunctioning of the fence system.

4. Checking the Receiver

Test the receiver collar by walking your pet around the perimeter. If the collar is not beeping or giving correction signals when close to the boundary, it might need new batteries or replacement.

These are just a few basic troubleshooting steps for your Innotek Basic In-Ground Fence. By following these, you can keep your pet safe and contained within your yard effectively. Remember, always refer to the user manual for detailed instructions on troubleshooting specific issues.